Banshee Jet Boats
Home Why we’re different Armor plating Jet pumpsThe formula for long-term performance The process Boat models About Pricing Financing Contact 717-853-1824
A green Banshee jet boat at rest on a calm, tree-lined river A green Banshee jet boat seen from the stern, reflected in still river water A green Banshee jet boat seen from directly above, showing the full deck layout A Banshee jet boat floating in clear shallow water over a rock and gravel bottom, seen from above

Banshee

Jet Boats

See both models

The formula for long-term
shallow-water performance.

A Banshee SR 72 Inboard Jet in gunmetal grey on its matching trailer

20,000+ hours on the river over the past 13 years

Banshee Jet Boats started because the boat we wanted did not exist.

We wanted jet boats that looked as good as they performed, with responsive handling, strong on-plane performance, and the durability to take the abuse serious boaters and anglers put their boats through. With maximum deck space, practical storage, and proven engine-and-pump combinations, every Banshee is built to fish hard and hold up season after season.

Why we’re different

Pick your powerplant.

Experience next-generation looks and mind-blowing performance.

A red and black SR 60 Outboard Jet with a Mercury outboard on the transom, afloat on a calm river

SR 60 Outboard Jet

Redefining the Outboard Jet

Built tougher. Engineered to perform. Experience true inboard-like performance with the proven reliability, simplicity, and serviceability of a Mercury outboard.

  • Hull length18′ 6″
  • Bottom width60″
  • Beam84″
  • Bottom plate.190″ 5086
More info about the SR 60
The SR 72 Inboard Jet seen from the stern, reflected in still river water

SR 72 Inboard Jet

Our flagship SR 72 Inboard Jet is the juggernaut of shallow-water jet boats.

Inboard jet drive. Wider, with more deck to work from.

  • Hull length19′ 6″
  • Bottom width72″
  • Beam96″
  • Bottom plate.190″ 5086
More info about the SR 72
Overhead view of a Banshee on the river

Why ours

Built by a team with over a decade of real-world experience.

Three things we do differently, and why each one matters on the water.

Designed around 20,000+ hours

Every layout decision comes from more than 20,000 hours of real-world use and abuse logged on jet boats — learning firsthand what holds up and what doesn’t.

Reinforced where it hits

Shallow rivers are unforgiving. The bottom is built for contact with rock, not just for looking good on a trailer.

Armor plating vs UHMW

Why we armor our hulls with 7000-series aluminum.

Read more about armor plating

See why we’re different

Shop talk

Not all jet pumps are created equal.

Horsepower gets the attention. The jet pump is what turns it into thrust. The formula for long-term shallow-water performance is the right pump for the application. In a rocky river, that means large, heavy-duty impellers with thick blades, moving serious water volume. We put five impellers side by side.

Compare the impellers

Armor plating

Why we choose aluminum armor plating over UHMW.

We don’t avoid UHMW because we don’t understand it. We’ve had enough experience with it to know its limits — so we armor the bottom with 7000-series aluminum that becomes part of the hull.

Read about armor plating

On the water

The boats.

Straight down on a red and black SR 60 Outboard Jet, showing the full deck layout over clear water
The SR 60 Outboard Jet over a clear gravel bottom
The SR 72 Inboard Jet in gunmetal grey on its matching trailer
A red and black SR 60 Outboard Jet from the stern quarter, Mercury Pro XS outboard on the transom
The SR 72 Inboard Jet from above, showing the full deck layout
A Banshee hull under construction in the shop, with the inboard jet drive alongside
The SR 60 Outboard Jet on the Susquehanna
The SR 72 Inboard Jet bow-on
The SR 60 Outboard Jet at rest on flat water
The SR 72 Inboard Jet deck and console
A red and black SR 60 Outboard Jet from the starboard stern, its reflection in still water
The SR 72 Inboard Jet on its trailer
Overhead view of an SR 60 hull
The SR 72 Inboard Jet alongside
A red and black SR 60 Outboard Jet on a calm river below wooded islands

Our process

What to expect when working with Banshee.

See how a build actually runs — what happens, in what order, and what we need from you at each stage.

See our process

Contact

Start the conversation.

Call 717-853-1824

  • Contact Us

  • 717-853-1824

  • 0/100
  • Should be Empty:

Privacy policy

Banshee Jet Boats

Custom shallow-water jet boats, built by the people who run the Susquehanna.

Boats

  • SR 60 Outboard Jet
  • SR 72 Inboard Jet
  • Pricing
  • Armor plating vs UHMW
  • Jet pumps & impellers
  • The process
  • Why we’re different

Contact

  • 717-853-1824
  • Contact
  • Apply for financing
  • About

Follow

  • Instagram
  • Facebook
© Banshee Jet Boats. All rights reserved. Privacy Duncannon, Pennsylvania